Adequacy Study For Firefighting System
Adequacy study for the firefighting system to satisfy the standard of fire protection to meet the industrial standards for safe…Air Dispersion Modelling
Air Dispersion Modelling study concerns the estimation of the pollutants in the ground level concentrations due to the operation of…Asset Integrity Management
Asset Integrity in Oil and Gas Industry refers to the process of ensuring that equipment, facilities, and structures used in…Behaviour Based Safety (BBS)
Behaviour Based Safety (BBS) is a strategy that uses safety observations to inform management and employees about the overall safety…Best Available Techniques (BAT)
Identification and implementation of Best Available Technique (BAT) implies a balanced judgment of the benefit derived from a calculation and…Biodiversity Management Plan
A Biodiversity Management Plan (BMP) is an implementation plan for conserving, restoration, and enhancement of biodiversity value. The BMP establishes the…Bow-Tie Analysis
What is the Bow Tie Model ? A 'Bow-Tie' is a graphical representation of the pathways from the causes of…Building Information Model (BIM)
BIM stands for Building Information System, where the power of BIM lies in the “I” (Information). All the information from…Building Risk Assessment
Building Risk Assessment is used to analyse the risk involved with people who are located inside buildings on site. It…CAD Drawings and Designs
The following are the activities done by usCase Study for 3D Fire and Gas Mapping Study
The 3D Fire and Gas mapping study is carried out to help in decision making process for locating the number…Case Study for Conducting QRA for Gantry and Vapour Recovery Unit
A valuable management tool in assessing the overall safety performance of the Chemical Process Industry is Risk Analysis. This techniques…Case Study for Consultancy Services for Design of Laboratory
Introduction Haya Water, a registered trademark of Oman Wastewater Services Company is an Omani closed joint-stock Company, wholly owned by…CHAZOP Study
A Control Systems HAZOP (CHAZOP) is a systematic and structured approach to identifying potential hazards and operability issues associated with…Coastal Zone Regulation (CRZ) Approvals
The Coastal Regulation Zone (CRZ) was established by the Central Government to guarantee livelihood stability for fishing communities and other…COMPREHENSIVE GUIDE TO DEVELOPING A TRAFFIC MANAGEMENT PLAN (TMP)
INTRODUCTION A well-structured Traffic Management Plan (TMP) is an indispensable component of any Construction Environment Management Plan (CEMP). It outlines…Computational Fluid Dynamics (CFD) Explosion Study
Computational Fluid Dynamics based explosion study is a mode of depicting the physical effects and hazards of releases that are…Constructability Review
The purpose of a Constructability Review is to work out if the project are often constructed as designed with the…Construction Environmental Management Plan (CEMP)
The purpose of a Construction Environmental Management Plan (CEMP) is to provide a framework wherein all environmental obligations during construction…Corrosion Study and Damage Mechanisms Review (DMR)
Corrosion Study: Discover the Complexities of Corrosion: Delve into the world of corrosion and its profound impacts on materials within…Demolition Environmental Management Plan (DEMP)
The purpose of the Demolition Environmental Management Plan (DEMP) is to provide a framework within which all environmental obligations during…Design HSE Case Study
Design HSE case study is to demonstrate the hazards associated with the proposed project. It comprises hazards that identified, evaluated…Design Performance Standards (DPS) For Safety Critical Elements (SCE)
The safety critical elements are those parts of an installation or plants that can be subjected to failure and substantially…Development of a Detailed Bow-Tie Analysis
Bow Tie analysis is to provide holistic overview of how each Major Accident Hazard (MAH) scenario is managed and also…Dropped Object Study
What is Dropped Object study? Dropped object Risk Study as part of safety assessment studies is predominantly required to support…EHAZOP and SAFOP Studies: Ensuring Industrial Safety and Operability
Electrical-HAZOP (Hazard and Operability) and SAFOP (Safety and Operability) studies are essential approaches to Industrial safety. These structured approaches aim…Electrical Design & Detail Engineering
The following services are done by us Basic Engineering System Studies Estimation of Plant Electrical Load Development of Single Line…Electrical Safety Audit
Electrical safety audit examines the electrical installations in an area. These audits are done by experienced professionals, they approve reports…Emergency Evacuation Rescue Analysis (EERA) for Offshore
The purpose of the EERA(Emergency Evacuation Rescue Analysis) study is to ensure that evacuation means (e.g. escape routes, muster areas,…Emergency Systems Survivability Analysis (ESSA)
Emergency Systems Survivability Analysis flowchartEmission Estimation & Regulatory Reporting
Emission Estimation is the method for evaluation of atmospheric emissions produced by its activities. The methodology would be complete, consistent,…Engineering Design
Architecture Civil Structural HVACEngineering Design and Consulting
We are a fast growing Start-up with hundreds of successfully completed projects within a short span of 7 years, well…Environmental and Social Impact Assessment (ESIA)
The Environmental and Social Impact Assessment (ESIA), which is based on an integrated assessment of the varied impact of projects,…Environmental Audit Studies
An Environmental Audit is a systematic, periodically documented and objective process in assessing an industry’s activities and services on the…Environmental Compliance Assurance Audit
To keep up with the dynamically evolving regulations, we have established a one-of-a-kind method to assist our clients in environmental…Environmental Due Diligence
What is Environmental Due Diligence (EDD)? Environmental Due Diligence is both a legal and technical exercise – an action of…Environmental Impact Assessment (EIA)
Environmental Impact Assessment (EIA) is a process of evaluating the likely environmental impacts of a proposed project or development, considering…Environmental Impact Identification (ENVID)
What is Environmental Impact Identification (ENVID) Environmental Impact Identification (ENVID) identifies potential environmental problems, ensuring that they are addressed from a…Environmental Management Plan (EMP)
The primary objective of the EMP is to provide information to the Authority on a proposed/existing activity within the regional…Environmental Risk Assessment Studies (Construction/Operation)
What is Environmental Risk Assessment Environmental Risk Assessment is a technique created to help in understanding and addressing some of…Environmental Social Management Framework (ESMF)
Environmental Social Management Framework ESMF is used as a safeguards instrument which manages potential adverse impacts through a guide consisting…Environmental, Social and Governance (ESG) Reporting
ESG, which stands for Environmental, Social, and Governance, highlights the aspects of a sustainable, responsible, or ethical investment.Environmental, Social, and…Escape Evacuation Rescue Analysis (EERA)
In the event of a significant incident, the design of a facility must be such any ensuing risk to personnel…Fabrication & Steel Structure Design and Drafting
Structural Design 2D drafting & 3D modelingStructural load calculationsFoundation designRoof structure designStructural element designStructural sheet metal product designStructural analysis for…Finite Element Analysis
Finite Element Analysis (FEA) in Oil and Gas Industry is a computational method used to simulate and analyze the behavior…FIRE AND EXPLOSION RISK ASSESSMENT (FERA)
FERA Purpose The primary purposes of a FERA study are as follows: FERA PROCESS The FERA Process flowchart is used…Fire And Gas Mapping
A Fire and Gas Mapping Study (FGMS) is a comprehensive evaluation performed in Industrial Facilities such as Oil and Gas…Fire Risk Assessment
A Fire Risk Assessment is a systematic and thorough evaluation of a building, facility, or premises to identify potential fire…Fire Safety Audit
A Fire Safety Audit is a systematic and comprehensive evaluation of a building, facility, or premises to assess its level…Flare Radiation and Dispersion Study
Flare stacks are the arrangement that are used to burn the combustible gases that are released out of the pressure…Flood Risk Assessment & Storm Water Management Studies
Rapid urbanization of cities have resulted in reduced infiltration of precipitation (rain, melted snow etc. also known as “Storm-water”) in…Flow Assurance Study
What is Flow Assurance Study? Flow assurance study involves a cost-effective approach to produce and transport fluids from the reservoir…Harmonic Analysis
Harmonic analysis is finished to carry out measurement of harmonics content and its analysis within the electrical power & distribution…Hazard & Operability (HAZOP) study Consultants
What is HAZOP? The Hazard and Operability (HAZOP) Study is a structured and systematic assessment of a complex system, (such…HAZard IDentification (HAZID)
HAZard IDentification (HAZID) is a well-known risk assessment & management tool used to establish inherent hazards / risks in an…Hazard Identification & Risk Assessment (HIRA)
What is HIRA? Hazard identification and risk assessment (HIRA) study offers a systematic approach to assess hazards and their associated…Hazardous Area Classification (HAC)
What is Hazardous Area Classification? Hazardous Area Classification (HAC) study is done to evaluate and assess the Plant area based…Health Risk Assessment (HRA)
What is Health Risk Assessment? Health Risk Assessment (HRA) is the primary method for identifying and classifying the occupational health…HSE Risk Management
HSE stands for Health, Safety, and Environment (HSE) management system is a proactive process for incidents prevention as well as…Human Factors Engineering (HFE)
Oil and Gas industry is a highly challenging industry, and human factors play a crucial role in occurrence of many…Hydrological Studies
Hydrology is the study of the amount and quality of water being stored or conveyed on the land surface, and…Illumination Study
illumination study evaluates the lighting installations in a very systematic, crucial manner of a facility into account to identify and…Inherently Safer Design (ISD)
The concept of Inherently Safer Design (ISD) pertains to the aspect of process safety that prioritizes the prevention of hazards…Laboratory Design
Our team operating Laboratory Design are with diverse and vast experience and have gained expertise in understanding the operational and…Land use/Land Cover Mapping Studies
Land use relates to the purpose of the land, such as recreation, wildlife habitat, or agriculture. Why Objectives of the…Layout Safety Review
Plant layout refers to the arrangement of physical facilities such as machinery, equipment, furniture within the factory building in such…Legionella Risk Assessment
Technical Challenge There are heaps of myths regarding bacteria, however it ought to be noted that the microorganism is virtually…LIFE CYCLE ASSESSMENT (LCA) Service In India
What is LCA (LIFE CYCLE ASSESSMENT)? Life Cycle Assessment (LCA) is a systematic method used to evaluate the Environmental Impacts…Lightning Protection Study
The overall objective of the Lightning Protection Assessment Study is to check and ensure that the entire plant area including…Noise Impact Assessment
The noise study is an activity conducted for the analysis, modelling and simulation of an industrial plant. Noise study has…Occupational Health Identification (OHID)
Occupational health identification(OHID) is a study in concern with protecting the health of people engaged in a work / employment…Offshore Quantitative Risk Assessment (QRA)
QRA(Quantitative Risk Assessment) is a method used to systematically calculate the risks from hazardous events. It involves predicting the size…Operations Environmental Management Plan (OEMP)
An Operations Environmental Management Plan (OEMP) provides specific guidance related to the operational activities associated with the facility. The roles…Passive Fire Protection Analysis
Passive fire Protection is an important component in preventing fire accidents due to its escalation effects on industries and buildings.…Pipeline Integrity and Reliability
Oil and Gas industry uses pipelines widely to transport its products over long distances .Pipelines ensures a certain amount of…PNGRB Guidelines: 22 Root causes for threat to pipeline integrity
What is PNGRB? PETROLEUM AND NATURAL GAS REGULATORY BOARD is a statutory body in India, constituted under the act of Parliament of…Power Systems Studies
Power System Studies are comprehensive assessments of the electrical supply system in a given facility. These studies are essential for…Pre Start-Up Safety Review
The PSSR is a safety review conducted prior to startup (commissioning) of a new or modified or temporarily shut processing/manufacturing…Procedure for RBI Implementation
Systematic Approach to RBI Implementation: Our Procedure for RBI (Risk-Based Inspection) Implementation section outlines a systematic approach for assessing and…Process Hazard Review (PHR)
Process Hazard Review (PHR) is a systematic and consistent approach of handling process design and development for safer operations and…PROCESS SAFETY KPI’s- API RP 754
HAZARD to HARM Hazards are contained by multiple protective barriers. These Barriers may have weaknesses or holes’ When holes align,…Process Safety Management
Process Safety Management is the application of management principles and systems to the identification, understanding, and control of process hazards…Project HSE Review (PHSER)
Project HSE review is to assure the company about identified HSE sensitive areas have been identified in a systematic way…Project Risk Assessment (PRA)
Risk to a project is an uncertain effect which might hinder the smooth running of the entire system. It might…Quantitative Risk Assessment (QRA)
Frequency and number of fatalities showed in FN CurveReliability, Availability and Maintainability (RAM) Modelling
What is a RAM analysis ? Reliability, Availability and Maintainability (RAM) study is a structured and quantitative approach implemented for…Safety Audit (as per IS 14489)
What is Safety Audit? A Safety audit is an organized process which is used to gather information associated to a…Safety Integrity Level (SIL)
The Safety Integrity Level (SIL) Study is required to assess the distinct level for specifying the security integrity needs of…Ship Collision Study
Ship Collision Study is to assess the risks and hazard of collision between ships (FPSO) and offshore installations including wellhead…SIL Validation
SIL Validation is a activity that is done as part of the Safety Instrumentation System Life Cycle as defined in…SIMultaneous OPerationS (SIMOPS)
Simultaneous Operations (SIMOPS) is the execution of two or more tasks by two or more functional teams on a similar location at the same time. SIMOPS in Oil & Gas and petrochemical industries occurs when activities related to construction, authorization,…Smoke & Toxic Gas Dispersion Analysis
Smoke and Toxic gas dispersion analysis study is used to evaluate the quantity of material that is released to atmosphere…Smoke and Gas Ingress Analysis (SGIA)
Smoke and Gas Ingress Analysis (SGIA) is a study of the smoke and gas engulfment hazardous events which leads to…Sprinkler System
What is a Sprinkler System ? A fire Sprinkler system is a vigorous fire protection methodology, consisting of a water system, providing adequate pressure and rate of flow to a…Stress Analysis
Any material or structure upon the application of forces is subjected to stress. This stress will result in the deformation of the material. Hence, it becomes essential…Surge Analysis
What is a Surge Analysis? Surge analysis is the study of pressure Change caused by a change in the piping system.…Telemetry Risk Assessment
Telemetry is practice of of gathering values at location remote from site of measurement. In the process instrumentation, all the…Value Engineering Study
Value Engineering is a systematic approach and effort to analyze the functions of systems, equipment, facilities, services and supplies for…Vehicle impact Assessment of Critical Pipelines
Vehicle impact assessment of critical pipelines is a crucial process to evaluate the potential damage caused by vehicle collisions with…Vehicle Load Analysis
The main objective of Vehicle Load Analysis for pipeline is to ensure the object’s integrity and stability during the maximum…Vehicular Traffic Modelling
Both the construction and operations phases of the project will result in increased traffic. Although the increased traffic for the…Vibration Modelling
Industrial Hygiene Qualitative Exposure Risk Assessment Vibration is defined as oscillatory motions of particles (molecules) around their equilibrium in a…Water Audit
Water audit is a systematic process that provides a detailed information on the facility’s water consumption and recommend ways to…WHAT “IF” ANALYSIS
A what-if analysis is a technique that is used to determine how projected performance is affected by changes in the…