Introduction
This F&G Mapping Study Abu Dhabi case study highlights iFluids Engineering Abu Dhabi’s expertise in delivering comprehensive F&G Mapping Study services for the oil & gas industry. The project demonstrates a structured approach to evaluating Fire & Gas Detection Systems, optimizing detector coverage, and enhancing process safety for industrial facilities across Abu Dhabi and the UAE.
Project Overview
Kuwait Oil Company (KOC) planned to develop its heavy oil reserves (°API range: 11–17) and establish production capacity for the South Ratqa Field located in North Kuwait. As part of this development, KOC intended to install the Thermal Testing Facility (South) to support the long-term testing and production of the Lower Fars Reservoir.
Zenith Group was appointed as the Design Contractor by Kuwait Oil Company and subsequently awarded iFluids Engineering to carry out the F&G Mapping Study for the Thermal Testing Facility (South) in the South Ratqa Field, North Kuwait.
Recognized for excellence.
PROJECTS DELIVERED ACROSS THE GLOBE
Objective of the Assessment
The primary objective of this F&G Mapping Study Abu Dhabi was to verify that the installed flame detectors and flammable gas detectors comply with the project’s Fire & Gas Detection Philosophy and approved detector layouts.
The assessment focused on:
- Verifying the effectiveness of existing Fire & Gas detector layouts.
- Evaluating flame detector coverage across designated areas.
- Assessing flammable gas detector coverage.
- Identifying detector coverage gaps.
- Recommending the required number of detectors where necessary.
- Determining the appropriate detector type for each application.
- Optimizing detector locations to improve Fire & Gas detection coverage.
The systematic assessment ensured that the Fire & Gas Detection System achieved the intended level of protection while improving overall detector effectiveness.
Methodology
The F&G Mapping Study followed a structured assessment approach to evaluate the performance of the Fire & Gas Detection System throughout the facility.
The methodology included:
- Review of the Fire & Gas Detection Philosophy.
- Evaluation of existing Fire & Gas detector layouts.
- Assessment of flame detector coverage.
- Assessment of flammable gas detector coverage.
- Identification of detector coverage deficiencies.
- Zone-wise assessment of detector performance.
- Recommendation for detector relocation where required.
- Recommendation for removal of unnecessary detectors.
- Recommendation for additional flame detectors and point-type gas detectors to improve overall coverage.
The study was carried out to ensure that detector placement and coverage effectively supported the project’s Fire & Gas Detection objectives.
Codes & Standards
The F&G Mapping Study Abu Dhabi assessment was performed in accordance with the following recognized codes and standards.
| Code / Standard | Description |
| KOC-L-036 Rev. 1 | KOC Recommended Practice for Design, Selection and Location of Fire & Gas Detection System |
| 015-YH-1003 | Loss Prevention Requirements |
| ISA TR-84.00.07 (2010) | Guidance on the Evaluation of Fire, Combustible Gas and Toxic Gas System Effectiveness |
| KOC-L-006 Rev. 2 | KOC Standard for Fire & Gas Detection Equipment |
| KOC-1-005 | KOC Recommended Practice for Fire & Gas System Panels |
| KOC.PS.018 | Process Safety Risk Management Procedure |
Summary and Key Findings
The F&G Mapping Study was performed using appropriate engineering software to evaluate the effectiveness of the existing Fire & Gas Detection System and determine the required improvements.
The assessment identified several opportunities to optimize detector coverage across the facility.
Key Findings
- Existing detector coverage was evaluated on a zone-wise basis.
- Several detectors were relocated within their respective zones to improve detection performance.
- A number of detectors were removed from areas where they were no longer required.
- Additional flame detectors were recommended to improve flame detection coverage.
- Additional point-type gas detectors were introduced within the corresponding zones to enhance gas detection coverage before the relocated detectors.
These recommendations improved the overall Fire & Gas Detection System by optimizing detector placement and enhancing detector coverage throughout the assessed facility.
Conclusion
This F&G Mapping Study Abu Dhabi demonstrates the importance of systematically evaluating Fire & Gas Detection Systems to ensure effective detector coverage and improved process safety. Through a structured assessment of detector layouts, coverage analysis, and detector optimization, the study identified practical recommendations to enhance the overall effectiveness of the Fire & Gas Detection System. At iFluids Engineering Abu Dhabi, we deliver comprehensive F&G Mapping Study Abu Dhabi services for oil & gas, petrochemical, and industrial facilities, helping clients optimize detector performance and support safer, more reliable plant operations.
Contact iFluids Engineering Abu Dhabi
Looking for an experienced partner for an F&G Mapping Study Abu Dhabi? Our process safety specialists are ready to support your project with comprehensive Fire & Gas Mapping Study services.
📧 Email: uae@ifluids.com
📞 Phone: +971 507814251
Frequently Asked Questions
An F&G Mapping Study Abu Dhabi evaluates the effectiveness of Fire & Gas Detection Systems by assessing detector coverage, identifying coverage gaps, and recommending optimized detector locations for industrial facilities.
An F&G Mapping Study helps verify that flame and gas detectors provide adequate coverage in accordance with the project’s Fire & Gas Detection Philosophy and detector layout requirements.
The study typically includes detector layout review, detector coverage assessment, identification of coverage gaps, detector relocation recommendations, and recommendations for additional flame and gas detectors where required.
F&G Mapping Study Abu Dhabi services are commonly performed for oil & gas facilities, petrochemical plants, process industries, and other industrial facilities where Fire & Gas Detection Systems play a critical role in process safety.
iFluids Engineering Abu Dhabi provides specialized F&G Mapping Study Abu Dhabi services using a structured assessment approach to evaluate Fire & Gas Detection Systems, optimize detector coverage, and support safer industrial operations.
